Eagle eye storage code#

When power is first applied, or after a power interruption, approximately 10 minutes will elapse before the detector starts to function. The detector operating temperature is 14 to 104 degrees F, ( -10 to 40 degrees C). What is the detector operating temperature? This should not noticeably affect its operation. Its sensitivity to these other gasses, however, is much lower than its sensitivity to hydrogen. The sensor detects several other combustible gases in addition to hydrogen - ethanol, isobutane, methane, propane. The sensor requires an oxygen environment.ĭoes the detector detect or react to other gasses? Will the detector work in a non-oxygen environment? The only moving parts are in the internal relays, and the relays are hermetically sealed. Not if you make tight wire connections to the detector. Hydrogen gas, 4.1% or more mixed with air, can be ignited by a flame, spark, or static electricity.Ĭan the detector itself cause an explosion? What can cause a hydrogen gas explosion?.A typical exhaust fan can meet this requirement if it is used in such manner that the concentration of hydrogen gas in the fan’s ambient air never exceeds the lower explosive limit.Adequate ventilation means providing natural or mechanical dilution sufficient to limit the accumulation of hydrogen gas in air at the charging site to levels below the lower explosive limit of 4.1%.Provisions be made for sufficient diffusion and ventilation of gases from storage batteries to prevent the accumulation of explosive mixtures.To the best of our knowledge at the time of this posting, existing regulations require that: Other regulations, state and local, may also apply. For the latest information, see the web sites of OSHA () and NFPA ().

Eagle eye storage code#

OSHA Regulations (Standards – 29 CFR), National Electrical Code (National Fire Protection Association Standard NFPA 70), and associated directives, interpretations and compliance letters apply.

What regulations apply to battery charging areas? Why are H2 hydrogen gas detectors important to have in a battery room?

Save insurance costs – reduce insurance premiums when placed in battery charging rooms.

Inexpensive protection for equipment and personnel.

Automatic Operation and Continuous 24/7 Monitoring.

If the concentration reaches 2%, the red LED will flash, the internal 80 db warning alarm will sound, and the 2% internal relay will close. A four-second delay prevents false activation. If the concentration of hydrogen gas in the air surrounding the sensor reaches 1% by volume, the yellow LED will light and the 1% internal relay will close. The relays can be used to switch a remote exhaust fan and/or alarm on and off.

The detector has a terminal block for connection to a single-phase AC power source and two internal relays. The HGD-2000 is easy-to-use and easy-to-install. The HGD-2000 H2 Hydrogen Detector and Sensor allows the user to monitor hydrogen gas buildup in storage rooms and facilities that house batteries.